INSTALLING WINDOWS NT DISPLAY DRIVERS

1.  Start Windows NT.
2.  From the MAIN window of the Program Manager run the
    Windows NT Setup program.
3.  Select CHANGE SYSTEMS SETTINGS... from the OPTIONS
    menu of Setup.
4.  Click on the down arrow at the right side of the
    DISPLAY: line. Scroll to the end of the list of
    available display drivers and select OTHER display
    (REQUIRES DISK FROM HARDWARE MANUFACTURER)...
5.  Insert the Windows NT display driver diskette into
    drive A: and type A:\[ENTER] as the pathname, then
    click on OK.
6.  You will see the list of available drivers, their
    associated resolution and monitor refresh rates, such as:

       Cirrus 6440 v1.10 640x480,  16 colors 60Hz
       Cirrus 6440 v1.10 640x480, 256 colors 60Hz
       Cirrus 6440 v1.10 800x600,  16 colors 56Hz
       Cirrus 6440 v1.10 800x600,  16 colors 60Hz
       Cirrus 6440 v1.10 800x600, 256 colors 56Hz
       Cirrus 6440 v1.10 800x600, 256 colors 60Hz
       Cirrus 6440 v1.10 1024x768, 16 colors Interlaced
       Cirrus 6440 v1.10 1024x768,256 colors Interlaced

7.  Highlight by moving the cursor to the desired display 
    driver, click on OK, and then click on CLOSE.
8.  Continue with the remainder of the setup procedure.  The
    changes will not take effect until the computer is restarted.
9.  After installed Windows NT driver, to select another display
    resolution, follows step 2 and 3 above, then click on the down
    arrow at the right side of the DISPLAY: line to select the 
    desired resolution from the list a available display drivers.


NOTE:
    These Windows NT drivers for GD6440 only support system or
    video adapter with 1MB of DRAM or more.

KNOWN BUG (02/23/94):
    When running Windows NT DCT DispTest, characters in the DispTest window
    change color switching from DOS Full screen to windowed screen,
