        #
        | README file for
        |
        | Windows NT CAPI-Driver for ELSA MicroLink ISDN/PCF
        | Version 0.14
        |
        | Copyright (c) 1993-97 ELSA GmbH, Aachen (Germany)
        |
        |                                     Subsidiary:
        | ELSA GmbH                           ELSA Inc.
        | Sonnenweg 11                        2150 Trade Zone Blvd.
        | D-52070 Aachen                      Suite 101
        | Germany                             San Jose, CA 95131
        |                                     USA
        |
        | Phone      : +49-241-606-0          Phone: +1-408-935-0350
        | Support Fax: +49-241-606-6499       Phone:  1-800-272-ELSA
        | BBS (modem): +49-241-606-9800       Fax  : +1-408-935-0370
        | BBS (ISDN) : +49-241-606-9820       BBS  : +1-408-935-0380
        | CompuServe : GO ELSA                CIS  : GO ELSA
        | WWW        : http://www.elsa.de     WWW  : http://www.elsa.com
        |
        | 03/27/97

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

        Table of Contents

        1.      Overview
        2.      Contents
        3.      Installation
        4.      Notes

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1.      Overview:

        This file contains notes and changes to the MicroLink
        ISDN drivers.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2.      Contents:

        This directory contains the following files:

        README.TXT   This file
        LIESMICH.TXT German version of this README.TXT

        SETUP.EXE    Installation Program

        CAPI2032.DLL CAPI Dynamic Link Library for Windows NT

2.1     Driver for CAPI 2.0 and 1TR6 (national ISDN):

        ISDNCAPX.SYS  CAPI version 2.0 driver for ELSA MicroLink ISDN/PCF
        D channel protocol : 1TR6 (national ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120
                             ISO 8208 (X.25), T.90

               - - - - - - - - - - - - - - - - - - - - - - - -

2.2     Driver for CAPI 2.0 and DSS1 (EURO-ISDN):

        DSS1CAPX.SYS  CAPI version 2.0 driver for ELSA MicroLink ISDN/PCF
        D channel protocol : DSS1 (EURO-ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120
                             ISO 8208 (X.25), T.90

               - - - - - - - - - - - - - - - - - - - - - - - -

3.      Installation:

        The following illustration shows the mounting bracket of
        your ISDN adapter board (16 bit):
                       _____
                       \    |
                        |   |
                        |___|
                        |___|<- ISDN line connector
                        |   |
                        |   |
                        |   |
                        | o |<- ISDN connection status display (yellow LED)
                        | o |<- ISDN interface status display (green LED)
                        |   |
                        |___|

                                                   _
         _________________________________________|
        |  |___| <- DIP switches                  |
        |                                         |
        |                                        _|
        |                                       |_ <- ISDN line connector
        |                                         |
        |                                         |
        |                                         o<- yellow LED
        |                                         o<- green LED
        |             _                      __   |
        |____________| |____________________|  |__|


        Use the DIP switches S1..S5 on the board to select the I/O address
        and IRQ line of the ISDN adapter board:

         -------------------------------- ----- -----
        | I/O address                    | S1  | S2  |
        |--------------------------------|-----|-----|
        |   160h ( default setting )     | off | off |
        |   170h                         | off | on  |
        |   260h                         | on  | off |
        |   360h                         | on  | on  |
         -------------------------------- ----- -----

         -------------------------------- ----- ----- -----
        | IRQ                            | S3  | S4  | S5  |
        |--------------------------------|-----|-----|-----|
        |   2                            | off | off | off |
        |   3                            | off | off | on  |
        |   5                            | off | on  | off |
        |  10* ( default setting )       | off | on  | on  |
        |  11*                           | on  | off | off |
        |  15*                           | on  | off | on  |
         -------------------------------- ----- ----- -----
         * only if a 16-bit slot is used

               - - - - - - - - - - - - - - - - - - - - - - - -

        Perform the following steps:

        a) Log on as administrator on your NT - System.

        b) Start the Installation Program SETUP.EXE and perform
           all steps described there.

        c) Shutdown and restart your system.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

4.      Notes:

        The latest information you will always find in the
        Support BBS ELSA ONLINE or on our homepage http://www.elsa.de.

               - - - - - - - - - - - - - - - - - - - - - - - -

        Have fun with your ELSA ISDN board.
