ELSA Synergy™II

The graphics solution for professional graphics applications

The ELSA Synergy II is the powerful graphics solution for applications in professional graphics such as visualization, graphics processing, DTP and CAD. The RIVA TNT2 chip from NVIDIA on the ELSA Synergy II provides not only extremely fast 128-bit 2D power, but also impressive 3D acceleration of professional applications when combined with special OpenGL drivers developed by ELSA.

Equipment
 Graphics processorRIVA TNT2 (NVIDIA)
 RAMDAC/pixel clockIntegrated /max. 300 MHz
 Memory16 MB SGRAM / 32 MB SDRAM
 BIOSVESA 3 (flash ROM)
 Bus systemAGP 2x/4x
PerformanceGraphics standardsOpenGL® (W98/NT4.0/W2000, DirectX3 (NT4.0), Direct X5/6 (W98/W2000)
 3D hardware featuresSingle-pass multi-texturing, MIP mapping, Gouraud shading, fogging, stencil
 StandardsVESA DPMS, DDC2B, plug&play
 ConnectorsMonitor: D-shell, 15-pin
 Dimensions167 x 38 mm (not including the mounting bracket)
Resolution Refresh rate in Hz3D resolution with double buffering
 PixelWith HighColor/TrueColorHighColorTrueColor
   16 MB32 MB16 MB32 MB
 1920 x 1200*96++-+
 1920 x 1080107++-+
 1600 x 1280109++-+
 1600 x 1200116++-+
 1600 x 1000*139++-+
 1280 x 1024170++++
 1152 x 864200++++
 1024 x 768200++++
 800 x 600200++++
 640 x 480200++++
 These values are maximums, and may not be achievable under all operating systems and conditions. Other graphics modes are easily set up under Windows. * Special resolutions for 16:10 wide format monitors (e.g. ELSA ECOMO 24H96), HighColor = 32,768 colors, TrueColor = 16.7 mill. colors
Graphics driversOperating systemsWindows NT® 4.0, Windows® 95, Windows® 98, Windows® 2000 (in preparation)
 Windows utilitiesELSA WINman Suite:
(ELSA Settings, Application Settings (only NT4.0), 3D Settings (only W95/W98)
Application driversAutoCAD®ELSA POWERdraft™: display list driver for AutoCAD R14 (only NT4.0)
 3D-ViewerELSAview 3D™ for visualization of 3D models with AutoCAD R14.01, Autodesk Mechanical Desktop, Autodesk Architectural Desktop or as stand-alone application (VRML 1.0, Open Inventor) under Windows NT
 3D Studio MAX/VIZELSA MAXtreme™: driver for productivity enhancements with 3D Studio MAX/VIZ R2x
 Misc.ELSA high-performance driver for OpenGL and DirectX
Supported ApplicationsSelectionPro/ENGINEER, Pro/MECHANICA, Pro/Desktop, AutoCAD® R14, Autodesk® Architectural Desktop, Autodesk® Mechanical Desktop, LightWave 3D, 3D Studio MAX/VIZ, MicroStation, I-DEAS Master Series, Solid Edge, Lightscape, WorldToolKit, dVISE NT, CA Unicenter TNG, SolidWorks, visplan, EDS Unigraphics, Superscape, GLView, AVS/Express, for Open Inventor based Applikationen, Logocad/Triga, HiCAD, ALLPLAN, AnySIM, Helix, Extreme 3D, CADdy++, ANVIL5000 and more
Certifications FCC, CE, Windows 98, Windows NT 4.0



Package contents
 User ManualComprehensive documentation in English and German
 Installation GuideGerman, English, French, Italian, Spanish and Dutch
 Driver/SoftwareOn ELSA WINNERware CD-ROM
ELSA-ServiceDirectWarrantySupport6 yearsvia hotline and Internet
Number0824
0784		ELSA Synergy II-16 (16 MB)
ELSA Synergy II-32 (32 MB)

All names mentioned in this document may be trademarks or registered trademarks of their respective owners. The ELSA logo is a registered trademark of ELSA AG.
Subject to change without notice. No liability for technical errors or omissions.