GLoria-L/MX

ELSA GLoria™-L/MX

3D High-performance Graphics for Professional CAD/CAM

The ELSA GLoria-L/MX has been developed especially for high-end 3D CAD applications. It offers professional 3D CAD users convincing workstation-like graphics power, yet on PCs. Its 3D graphics acceleration, which allows direct 3D model editing, is especially beneficial to users in the fields of architecture and engineering.

EquipmentGraphics processorGLINT MX (3Dlabs)
3D coprocessorGLINT Delta (3Dlabs)
Boot VGAS3 ViRGE VGA on-board with 1-MB DRAM and/or analog VGA loop-through; VGA can be disabled
RAMDAC/pixel cycleup to 220 MHz
Memory 8-MB VRAM, 16-MB DRAM
BIOSVBE 2.0 support (640 x 480, 640 x 400)
Bus systemPCI
FeaturesH frequency31–300 kHz
Graphics standardsOpenGL (under Windows NT), Direct3D, DirectDraw
3D-hardware featuresTexture MIP mapping, Gouraud & flat shading, anti-aliasing, fogging, overlay etc.
Multi-screen operationfor Windows NT 4.0 and Windows NT 3.51 (Intel)
StandardsVESA DPMS, DDC2B
Terminalsmonitor: D-Shell 15 pin
Dimensions248 x 107 mm (not including the mounting bracket)
3D resolutionsZ buffering/Refresh rates
Double buffering256 colorsHighColorTrueColor
1920 x 108075 Hz75 Hz-
1600 x 120081 Hz81 Hz81 Hz
1600 x 1000*97 Hz97 Hz91 Hz
1280 x 1024117 Hz117 Hz117 Hz
1152 x 864163 Hz163 Hz163 Hz
1024 x 768200 Hz200 Hz200 Hz
800 x 600200 Hz200 Hz200 Hz
The values specified here are maximum values and can not always be achieved under some operating conditions.
Other graphic modes are easily configured under Windows®.
*): special resolution for 16:10 wide-format monitors (e.g. ELSA ECOMO 24H96);
HighColor = 32,768 colors, TrueColor = 16.7 million colors.
Drivers/SoftwareOperating systemsWindows NT 4.0 and Windows NT 3.51 (Intel, DEC Alpha), Windows®95
CADELSA POWERdraft™ display list driver for AutoCAD R13 and R14
 ELSAview 3D™ for 3D visualization with AutoCAD R13 and R14, Autodesk Mechanical Desktop and as stand-alone application
OtherELSA high-performance drivers for OpenGL, HEIDI and Direct3D
 ELSA MAXtreme™ drivers for increased productivity using 3D Studio MAX/VIZ R2x
Windows utilitiesELSA WINman Suite (Windows NT: GLoria Settings, Monitor Control and Windows 95: ELSAinfo ), MPEG Software Decoder
Supported applicationsSelectionAutoCAD®, Autodesk® Mechanical Desktop, LightWave 3D, 3D Studio MAX/VIZ, MicroStation, MicroStation Modeler, SoftImage, Pro/ENGINEER, Pro/MECHANICA, I-DEAS Master Series, Solid Edge, Lightscape, WorldToolKit, dVISE NT, CA Unicenter TNG, SolidWorks, EDS Unigraphics, Superscape, visplan, Real 3D 3.5, GLView, AVS/Express, Open Inventor based Applications, LOGOCAD/TRIGA, HiCAD, ALLPLAN, ANSYS, AnySIM, Helix, Extreme 3D, CADdy, Pro/DESIGNER, ANVIL5000 and more



Package contentsManualextensive documentation in English and German
Installation GuideEnglish, German, French, Italian, Spanish and Dutch
Drivers/SoftwareELSA WINNERware on CD-ROM
ServiceWarranty6 years
 Supportvia hotline and Internet
No.0589ELSA GLoria-L/MX

All names mentioned in this document may be trademarks or registered trademarks of their respective owners. The ELSA logo is a registered trademark of ELSA AG.
Subject to change without notice. No liability for technical errors or omissions.